Opticon / HP / SoMo Reset

Opticon ® Soft - Hard - Factory Reset
Opticon H16 / H19 Soft - Hard Reset (Warm - Cold Boot)

Opticon H16 / H19 Soft Reset - Warm Boot

1. Press the RESET button with stylus to soft-reset your device.


Opticon H16 / H19 Hard Reset - Cold Boot

1. Press and hold the POWER button longer than10 seconds immediately after pressing the RESET button.
2. You can then choose one of the following steps:
    - Pressing the left key of the 5-way navigation key to format user store.
    - Pressing the right key of the 5-way navigation key to format DiskOnChip.
    - Press the up key of the 5-way navigation key to format both user store and DiskOnChip.
    - Press any other key to exit.


Opticon H21 Soft - Hard Reset (Warm - Cold Boot)

Opticon H21 Soft Reset - Warm Boot

1. Use the stylus to press the button behind the hole at the left side of the device.


Opticon H21 Hard Reset - Cold Boot

1. First remove the back lid and the battery and return the lock that
   keeps the lid in place back in the position as if the back lid would be on.
2. Then keep both the POWER + Capture + End keys pressed while inserting the battery.

Power key= The red key on the top of the device. End key= The key with the red phone icon on it.
Capture key= The one on the right side of the End key, It has a camera icon on it.

3. If performed right, the device will shake and boot the white start-up H21 screen.
   After a few seconds you get a Warning message, press YES to clean boot:

    - For H21 numeric keypad: Use the button that's above the F2 key for YES
      and the button above F3 for NO.

    - For H21 qwerty keypad: Use the button that's above the F1 key for YES
      and the button above F2 for NO.


HP-Ipaq ® Soft - Hard - Factory Reset
HP-IPAQ hx2000 Series Soft - Hard - Factory Reset (Warm - Cold Boot)

IPAQ hx2000 Series Soft Reset - Warm Boot

1. Use the stylus to lightly press the Reset button.
   The Pocket PC restarts and displays the Today screen.




IPAQ hx2000 Series Hard Reset - Cold Boot

1. Press and hold down the Calendar and iTask buttons.
2. While holding down these buttons, use the stylus to lightly press
   the Reset button on the bottom of the iPAQ Pocket PC for about 2 seconds.




3. When the Pocket PC screen begins to fade, release the Calendar and iTask buttons first,
   and then remove the stylus from the Reset button.

IPAQ hx2000 Series Factory Reset

1. Press and hold the Calendar button, the Power button, and the Messaging button.
2. While holding these buttons, use the stylus to lightly press
   the Reset button on the bottom of the HP iPAQ.




HP-IPAQ 112 Series Soft - Hard Reset (Warm - Cold Boot)

IPAQ 112 Series Soft Reset - Warm Boot

1. Use the stylus to lightly press the Reset button.




IPAQ 112 Series Hard Reset - Cold Boot

1. Hold the Start/Windows button, OK button, Record button at the same time

   and then press and release the Reset button using the stylus.
2. Continue holding the Start/Windows button, OK button, and Record button until a Clean Boot message displays.
3. This indicates successful restoration of factory settings on your device.




Key: (1) Reset button (2) Record button (3) OK button (4) Start/Windows button


HP-IPAQ 212 Series Soft - Hard - Factory Reset (Warm - Cold Boot)

IPAQ 212 Series Soft Reset - Warm Boot

1. Use the stylus to lightly press the Reset button.




IPAQ 212 Series Hard Reset - Cold Boot

1. Use HP iPAQ Setup Assistant to simplify configuring settings on your HP iPAQ.
   HP iPAQ Setup Assistant lets you save the settings on your computer.
   This can help you restore configuration settings on your HP iPAQ at any time.
   HP iPAQ Setup Assistant also allows you to perform a factory reset on your HP iPAQ
   and view detailed product Information.

IPAQ 212 Series Factory Reset

Step one - Checking memory availability in iPAQ File Store folder:
1. Tap Start on your device.
2. Then tap Settings > System > Memory > Storage Card .
3. Select iPAQ File Store from the list.

Step two - Saving files and programs in iPAQ File Store folder:
1. Copy all the files to be saved to the iPAQ File Store folder.
2. Tap Start > Programs > File Explorer > My HP iPAQ > iPAQ File Store .
3. Tap Edit > Paste .

Step three - Performing factory reset using buttons:




(1) - Record
(2) - Windows
(3) - OK
(4) - Reset
1. Hold all the buttons for 2 seconds.
2. Release the Reset button while continuing to hold the Record , Windows , and OK buttons.
3. A Clean Boot message is displayed, indicating successful restoration of factory settings on your device.


Socket ® Soft - Hard - Factory Reset
Socket Mobile SoMo 650-M Soft - Hard - Factory Reset (Warm - Cold Boot)

Socket Mobile SoMo 650-M Soft Reset - Warm Boot

1. Using the tip of your stylus, lightly press the Soft Reset button
   inside the hole on the bottom of your SoMo 650 and then release.




Socket Mobile SoMo 650-M Hard Reset - Cold Boot

1. Press and hold the Calendar and Contacts shortcut buttons on your SoMo 650.
2. While holding the two buttons, using the tip of your stylus, lightly press the Reset button
   inside the hole on the bottom of your SoMo 650. Release the Calendar and Contacts shortcut buttons.




   Press the two shortcut buttons with the index and middle finger of one hand.
   Hold the stylus in your other hand to press the Reset button and then release.
3. A Socket Splash Screen will appear and disappear. Follow the onscreen instructions.


Socket Mobile SoMo 650-M Factory Reset

1. Press and hold the Left Programmable Application Button,
   the Calendar and Contacts shortcut buttons on your SoMo 650.  







2. While holding the three buttons, using the tip of your stylus, lightly press the Reset button
   inside the hole on the bottom of your SoMo 650 and then release.